Applications:
- Blooming roller
- Continues caster roller
- Deburring tools
- Extrusion dies & screws
- Galvanizing pot roll bearings& other parts
- Hot forging hammers& cutting tools
- Press tools
- Punching tools
- Pump shafts & sleeves.
- Trimming dies
- Valves
- Wire drawing guide
Hot Forging- DIE repair
PRODUCT GOLDDESCRIPTIONSTECHNICAL DETAILS
| 406-SMAW, 406-GTAW 406-FCAW-G, 406-PTA |
Cobalt based (GR 6) Hard facing alloy for surfacing of parts which are subjected to a combination of metal/metal wear, corrosion and heat up to 800°C and shortly up to 1000°C. FOR STEAM TURBINE APPLICATIONS |
Hardness : 42-45HRC at 20°C38HRC at 60°C Weld Metal : |
| 412-SMAW, 412-GTAW 412-PTA |
Cobalt based (GR12 ) Hard facing alloy for surfacing of parts which are subjected to a combination abrasion, corrosion and adhesive wear . For sawblade tipping (timber) ,chain saw guide bars, chipping knives, paper & plastic cutting knives ,rubber mixer rotors and bodies etc. |
Hardness : 46-50 HRC36-40 at + 600° C EN 14700: E Co2 |
| 421-SMAW,412-GTAW 421-PTA |
Cobalt Grade 21 Alloy used primary for hardfacing of gas turbine blades, forging dies, motor valves etc. Excellent resistance to shocks, cracks, cavitation and corrosion. Non magnetic weld deposit |
Hardness : + 20 C 32-38 HRC36-40 at + 600° C EN 14700: E Co1 |
| 425-SMAW | Special Nickel base alloy for build ups and overlays which must resist high thermal schocks and metallic abrasion Machinable deposit with excellent resistance to compression and corrosion. Deposit will work-harden under pressure . Alloy C type (Ni-Cr-Mo ) |
Hardness : ~ 250 HBWork-hardened 350-400 HB EN 14700 : E-NI 2 |
| 450-SMAW, 450-GTAW
(GOLD 1015) |
Martensitic type hardfacing deposit For parts subjected to metal to metal wear up to 550 C Weld Deposit is machinable by grinding. EN14700- ~Fe-3 |
Hardness : 45—50 HRCWeld Metal Analyse : Cr, V, W, |
| 620-SMAW
(GOLD 720) |
Special hard facing electrode with high –speed steel characteristics. Crack resistant deposit, high temperature oxidation resistance, excellent cutting properties, high hardness Weld Deposit finished by grinding EN 14700: E-Fe4 |
Hardness : ~ 60—63 HRCWeld Metal Analyse : C, Cr, Mo, W, V (martensitic) |
FOR TOOL AND DIE REPAIR /HOT FORGING/METAL TO METAL WEAR
For Guides in Steel wire Processing
Roller in Steel Mill
Extrusion & feeding screws
Hot forging -DIE Repair
Aluminum die cast moldsARCWEL 728-GTAW
Deep drawing dies